Free · takes a minute · your resume fills your profile
CoreHRx never asks candidates for money. If anyone does, .
Employment Type: Permanent
Location: Anywhere in India
Work Mode: Remote / Work From Home (WFH)
Experience Required: Minimum 5 Years
Technology Node: 5nm and Below (Mandatory)
Tape-Out Experience: Minimum 4 Successful Tape-Outs Below 5nm
We are looking for an experienced Design for Test (DFT) Engineer with hands-on expertise in DFT architecture, implementation, and verification for advanced-node SoCs and subsystems.
The role involves scan insertion, scan compression, ATPG, MBIST/LBIST, test coverage closure, and DFT signoff for semiconductor designs at 5nm and below.
Candidates must have a minimum of 5 years of relevant DFT experience, direct ownership of at least 4 successful tape-outs below 5nm, and practical experience with UPF-based low-power designs.
2. Key ResponsibilitiesDevelop and implement DFT architectures for complex SoCs and subsystems at 5nm and below.
Perform scan insertion, scan chain configuration, and scan compression implementation.
Develop and execute Automatic Test Pattern Generation (ATPG) flows for stuck-at, transition, and other applicable fault models.
Analyze test coverage, debug DFT violations, and achieve coverage closure.
Implement and verify Memory Built-In Self-Test (MBIST) architectures for embedded memories.
Support Logic Built-In Self-Test (LBIST) insertion, implementation, and verification.
Implement and validate JTAG (IEEE 1149.1) and IJTAG (IEEE 1687) test access architectures.
Integrate DFT structures into UPF-based low-power designs, including power-domain and test-mode considerations.
Perform gate-level simulation (GLS) and validation of ATPG and DFT test patterns.
Address timing-aware DFT challenges, including test-mode timing constraints and scan-related timing issues.
Collaborate with RTL design, physical design, STA, and verification teams to resolve DFT integration and signoff issues.
Support DFT signoff, tape-out readiness, post-silicon validation, and silicon bring-up activities.
Bachelor's or Master's degree in Electronics, Electrical Engineering, VLSI, Microelectronics, or a related discipline.
Minimum 5 years of relevant hands-on DFT engineering experience.
Proven DFT implementation experience on 5nm or more advanced technology nodes.
Minimum 4 successful tape-outs at nodes below 5nm, with direct DFT ownership and implementation responsibilities.
Hands-on experience with scan insertion, scan compression, ATPG, and test coverage closure.
Practical experience implementing and verifying MBIST and/or LBIST structures.
Working knowledge of JTAG, IEEE 1149.1, and IEEE 1687 (IJTAG).
Mandatory hands-on experience with UPF-based low-power DFT implementation.
Experience with Synopsys TestMAX, DFT Compiler, TetraMAX, and/or Siemens Tessent.
Understanding of DFT timing constraints, gate-level simulation, and SoC test integration.
DFT Architecture and Implementation
Design for Testability (DFT)
SoC / Subsystem DFT Architecture
Scan Insertion and Scan Chain Design
Scan Compression and Decompression
DFT Integration and Signoff
ATPG and Test Coverage
Automatic Test Pattern Generation (ATPG)
Stuck-At Fault Testing
Transition Fault Testing
Fault Coverage Analysis
Test Pattern Generation and Validation
Test Coverage Closure
Built-In Self-Test
Memory Built-In Self-Test (MBIST)
Logic Built-In Self-Test (LBIST)
Memory Test Integration and Verification
BIST Architecture and Debugging
Test Access and Standards
JTAG IEEE 1149.1
IJTAG IEEE 1687
Test Access Mechanisms
DFT Test Controllers
Advanced Nodes and Low-Power Design
5nm and Below Technology Nodes
Advanced FinFET / GAA Technology (as applicable)
Unified Power Format (UPF)
Low-Power DFT Integration
Multi-Power-Domain SoC Designs
Test-Mode Power Management
EDA Tools
Synopsys TestMAX
Synopsys DFT Compiler
Synopsys TetraMAX
Siemens Tessent
Verification and Signoff
Gate-Level Simulation (GLS)
Timing-Aware ATPG
Scan Timing Analysis
DFT Rule Checking
DFT Signoff and Tape-Out Support
Post-Silicon Test and Bring-Up
Important Candidate Eligibility Criteria
Candidates must meet all four mandatory requirements:
Minimum 5 years of relevant DFT experience.
Hands-on DFT implementation experience at 5nm or below.
Minimum 4 successful tape-outs with direct DFT ownership at nodes strictly below 5nm.
Hands-on experience with UPF-based low-power designs.
Candidates who do not meet these mandatory criteria will not be considered for this position.
#LI-SD1
Most IT Jobs posts in Bangalore ask for 3–6 years of experience (41% of 5429 that say).
From live job posts on CoreHRx, updated 21 Nov 2026. Skill figures count posts that list their skills; salary figures only posts that show a salary.
The post does not state the pay. As an estimate, comparable posts on CoreHRx advertise ₹13L – ₹25L a year (typical for IT Jobs in Bangalore, 281 posts).
The post asks for 5 Yrs experience.
It is a remote job, listed under Bangalore.
It is a full time job.
Interview preparation · 12 questions
Preparing for an IT or software developer interview in India? This guide covers the rounds companies run, the technical and HR interview questions asked most often for freshers and experienced developers, sample answers you can adapt, and a simple preparation plan.
Questions you may be asked
Create a free profile and we email you new IT jobs you can do remotely, at most once a week.